Mitre saws are very handy in the workshop, but they have a big disadvantage when sawing small pieces of wood.
There’s a big hole through the fence around the leaf. This makes it possible to cut small parts in the mountains safely and accurately. This also complicates the finishing or production of the frames.
Of course you want to prevent these little pieces of wood from flying around in your workshop, so what can you do?
The solution is simple and consists of creating a simple but effective secondary fence for your cam saw. This stop rests on the saw and creates zero play for the saw blade.
Why do you need a second fence?
There are many good reasons to add a sacrificial fence to your saw.
- They minimize the risk of small pieces of wood becoming dangerous shells.
- Secondary fences give you extra support
- You’re much less likely to get a tear in the back of the incision.
- It is easy to take notes on the fence, which is especially useful when working in difficult corners.
- You can add a stop
- The marking of the next cut is facilitated by the use of a line in this sacrificial fence.
- Secondary fences are great when you make frames.
- You will appreciate the increased accuracy of 90 degrees straight cuts.
Now do you understand why you need a fence, how to make it?
Good news, it’s incredibly easy!
How to build the most efficient Mitro-saw fence
- Cut a 7-inch wide piece of plywood or MDF to use as a base for your fence.
- Cut another 4-inch wide piece for the fence itself.
- The length of both parts should be about 30 inches.
- Join the wooden strips with glue and 2-inch braid nails. Be sure to mark the place where the saw blade should be cut and avoid nailing in this central area. The last thing you want is for your saw blade to hit a nail…
- Drill a few test holes and use a thumbscrew, and attach the parts together until they are dry.
- With a few ½ plugs you can make sure your secondary fence stays in place. It also makes it easy to remove the fence if you don’t need to use it.
- Make a 90-degree incision in the center of the fence.
- Drill holes in the table below at an angle of 45 degrees (left), 90 degrees and 45 degrees (right) so that you can insert the plugs for ½.
This gives you a large secondary fence on the terrain that you can easily remove.
universal miter saw fence,miter saw fence extension,miter saw fence replacement,miter saw fence upgrade,miter saw station fence,zero clearance miter saw fence,diy miter saw fence system,ryobi miter saw fence
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.